Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
hello ppl,
My final year project is to control servo motor, i am considering two different loading conditions in the means of two switches which is connected to the P1.0 and P1.1 of the micro controller. I am taking the output pulse via P0.0. I am using ULN 2003 to drive the MOSFET IRF 840 and I...
Hello ppl,
i am a newbie in KEIL, can anyone tell me how i can load the program into 89S52 using the KEIL software?
It would be of great help if ppl respond quickly
@Kabiru:
thanks a lot for ur reply, is there any relation u can provide me, whether duty cycle is inversely/directly proportional to the speed of the motor?
Hello ppl,
is there any relation between speed and duty cycle???
I am using a micro controller to drive a servo motor. can i get a relation that relates the pulses from the controller to the speed of the motor?
Delay in 89S52
@IanP:
Thanks a lot :)
@All:
Does 89S52 contain the header file delay.h, if so i can directly give what milli-second delay i want, am i right??
Relay Doubt
Can i directly connect the output of ULN 2003 to the GATE of the MOSFET....i intend to do the same operation that a relay does with the pulse, so can i use ULN 2003 as a driver to the MOSFET?? suggestions pls
Relay Doubt
@IanP: one small doubt, should i connect the output of the ATMEL 89S52 to the relay or to the gate of MOSFET?? because in the above cartoon the control circuitry is connected somewhere else. thats y this doubt
I meant what is exactly mentioned in the above cartoon, thanks a lot for...
Relay Doubt
@Ian p:
The pictures are so self-explanatory :) thanks a ton for ur help.
Can i connect the output of the relay to the MOSFET of a buck converter??
Relay Doubt
@IanP:
I need to switch off the motor and is way i had planned to use a relay. I just didn't know which pin of the relay should be considered as input and which as output because i didn't find the pin configuration anywhere. I have got a 5V relay with me which is Goodsky...
Hello ppl,
my final yr project is to control the servo motor using micro controller, i have planned to use a relay but i am not sure which one to use. I am using ULN 2003 to drive the relay which is driven by a +12V supply but the motor that we are using is +4.8V-+6V, so which relay rating...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.