Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by rajkumar_avg

  1. R

    HP pavilion laptop screen

    Hi All I have HP pavilion laptop with Vista OS. In some times, restarting my laptop the screen color is is fully red instead of black. Could any one help me out on this issue. Advanced thanks. Rajkumar
  2. R

    Inner layer's pad size increment

    Hi Folks, I have a doubt in multi layer PCB. Should we increase the via and through hole component's pads size in inner layer than outer layers? If yes means could anyone explain me about for what we should do? Any help would be greatly appreciated. Thanks in advance. -Rajkumar
  3. R

    Files to be needed for PCB Fabrication

    I sent Silkscreen, Solder mask, Routing layer and Drill files. But the PCB fabricator needed Extended Gerber files. Can anyone knows about that? How should I change this files to extended Gerber files? Any help would be appreciated. Regards, Rajkumar.R
  4. R

    Files to be needed for PCB Fabrication

    Hi All, We are using VERIBEST PCB Design software for PCB layout design. Could anyone tell me what are the files to be needed for fabricate the PCB after generating Gerber files? If you could help it would be appreciated. Thanks in Advance. Regards, Rajkumar.R Bangalore.
  5. R

    Improving bow and twist in PCB

    Re: Bow and twist.. Thanks for information. -Rajkumar
  6. R

    Improving bow and twist in PCB

    Hi All, Can anyone assist me this problem with PCB manufacturing. I made a four layer PCB. The copper in inner layer is impbalace. Now inorder to improve the bow and twist the manufacturer is asking me to add some dummy copper in empty places on layer with the clearance of 40mil. Incase if i...
  7. R

    Problem with flood in PowerPCB

    Double click the copper pour line and select the net name which has to be filled with copper. I could not get your question properly. Any have you enter into draft and design options. You will come to know the problem. -Rajkumar
  8. R

    Combining Multiple Schematics in PADS

    Thats gud.
  9. R

    how to rout a net with shield in pads?

    By using clerance only you can fix this routing shield. -Rajkumar
  10. R

    Combining Multiple Schematics in PADS

    There shouldn't be the same references in both schematics. You chek and fix. Later you can import two schematics on PADS at once. -Rajkumar
  11. R

    How to print out the design rules in PADS

    Re: DESIGN RULES IN PADS By using the report option you can try to get the information. -Rajkumar
  12. R

    PADS library footprints

    You go throgh the mentor.com website. -Rajkumar
  13. R

    Which PCB tool will be the best choice to beginner?

    beginner pcb PADS PWR PCB is best for beginner. -Rajkumar
  14. R

    manual via placement in pads layout

    By using ctrl and right clik mouse button you can end the via. Also by using shift and right cilck in mouse button you can continue the track after the via placement. -Rajkumar
  15. R

    What's the purpose of SMOBC?

    Hi all, Can anyone explain me about SMOBC and purpose of SMOBC? If you could assist it would be appreciated. Rajkumar
See more

Part and Inventory Search

Back
Top