Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
automatic sprinkler solenoid high pressure
The larger is the garden, the higher has to be the pressure.
The pressure required depends also from the irrigation system. Drop by drop irrigation requires much less pressure than fountain irrigation.
Probably an overhead tank doesn't give you...
indian washing machine water outlet mechanism
Hi Coolchip,
how do you measure soil humidity?
I made a search on the internet, but it doesn't seem to be a simple thing.
software compensation for digital clock
Choose a Microcontroller with internal timer and with it you can avoid using delays.
Keep in mind that the crrystal has to be very accurate for this application.
In the software include a compensation routine.
Regards
Nox
I am building the Engineer's Assistant, as described on Microchip AN689.
It is a 16F84 based handheld instrument that has the following functions:
Frequency meter up to 50 MHz
Logic probe
Logic state analyzer
Serial code receiver
Anyone built it?
Any suggestion?
Problems?
Thanks
Nox
list of data 0-12 transformer
Give a look here:
**broken link removed**
Consider that you can do the connections only on the same elctric installation: the signal cannot cross the meters.
Nox
skyglin, it is not necessary you connect the caps directly to the pins of the ic's.
It's enough you decide the number of caps and simply connect them on the schematics to Vcc and Gnd.
As you place components, put the caps as close as possible to each ic, and route manually the traces, or verify...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.