Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
yes, you're right... ;)
I just read the whole thread, it's really long, but it gave me a lot of background information. Last time I read it about two weeks ago, but I decided to start again.
Think I gathered all relevant information, so when I found some spare time betwen exams, I will try it...
hi all
does anybody know somethnig about display from siemens A35 cellular phone? I would like to know what driver is inside of it and pinout of that display
thanks
Re: My ICD2
yes, on my ICD2 clone I've seen it flashing when I used wrong bootloader, but after it, using a right bootloader it remains idle.
Added after 4 minutes:
by the way, there is image of my device
http://www.floyd.szm.sk/b/icd.jpg
it's conneted to little experimental board with...
In this forum, I read many times questions how to build DS89C4X0 programmer - but it's question completely wrong, sourcing from absolutely lack of understanding of memory programming procedure of these chips.
Somebody just order free samples from Dallas-Maxim and even when it arrives, just...
Hi all,
I just started using metrowerks codewarrior with HC908JK8 chip, I made a few projects, consisting of a few files, like main.c (created by cw) and other routines in other file, let's call it other.c. I wrote other.c by myself.
It all works fine, my JK8 chip is working so i tried to make...
i've got a display from GSM phone motorola m3188 and i would like to know it's pinout and LCD driver, because i wolud like to use with microcontroller.
i searched on web, but i found nothing
could anybody help me to find infromations about it, please?
IanP, hill: thank you, I was also thinking it's not opssible due to it's archtecture, but I realise I don't know everything, so I asked to somebody more experienced :)
did anyone tried to run somehow code from RAM on PIC?
i made it with motorola HC08 micrcontrollers - that have Von Neumann's architecture making easy to jump from code space to data space with loaded program, but PIC are Harward architecture based with separate data and code spaces.
my idea is...
icd2 mplab make
thaks toeverybody, who tried to help me getting ICD2 clone to work, but now it works perfectly. i found main error- resistor 22 kOhms in base of one of transistors wasn't really 22 kOhms, but just 22 Ohms (terrible!) because of unreadable numbers on it :)
i found it with...
pic prototyping board + icd
and in your previous posts you wrote you can send my files to build ICD clone, so please send it to travex(at)zoznam.sk
thanks
diy icd for pic16f877a
martinisonline:
yes it would be logical, when it cannot read id, problem will be something around thae target and connections to it.
but first thing i don't understand is why MPLAB tells me error after setting Vdd, because circuit by Stolz doesn't set Vdd at all, and Vdd...
icd2 firmware pic16f876
yes, i also thought that problem was with bootloader (at first i used icd661.hex, which is in fact bootloader + os for 16F) - thats why i tried another two bootloaders (downloaded from thid forum) but without success
i'm really confused that it does not work
with icd...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
