Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by DavidP

  1. D

    Recommend me standard capacitor datasheet

    capacitor's datasheet Try Philips. They have good data on capacitors. David
  2. D

    Please Recommend BGA Rework station!

    Check www.metcal.com it is expenssive but the best. You may want to check ebay for a better price. David
  3. D

    Data sheet on PSB2120-P (Siemense)

    Thank you so much. I tried to download the data but it doesn't work. I would be grateful if you could attach it to an email. My adress is sigma@netvision.net.il Thanks again David Popovits
  4. D

    Data sheet on PSB2120-P (Siemense)

    siemense I need data on this IC In Siemense site or Infinion it is no longer present. Can someone help. It is a switching regulator. Thanks David
  5. D

    Whats the best way to isolate A2D on a telephone line?

    Re: A/D on telephone line I thank all memebers trying to help me. Some of the ideas are really usefull. The measurements are needed for PABX switches. I'm improving my automatic multi port tester. For this reason I must measure actual voltage on the line. With hook on I have to check that the...
  6. D

    Operating voltages of SMD capacitors ?

    Check the RS catalogue at www.rs-components.com They have good data on this subject. David
  7. D

    Why are there some uC with separated vdd (AVDD and DVDD )?

    Re: separeted vdd's A digital part of an IC is ussualy faster then the analog circuitry. The speed difference in returning to ground may cause noise affecting mostly the analog section. By separating the power pins to each part you create different paths for each part and performance will be...
  8. D

    Battery Backup Power Supply

    battery charger power supply In parallel with the series diode connected between the positive tag of the bat. and the output of the PSU (anode towards the bat.) connect a 20-30 Ohm 5W resistor. This will charge the bat while mains is on. This method is working fine in alarm systems. As...
  9. D

    Suggest a cheap switching regulator

    Re: switching regulator You may use the 7805 in switching mode. it works fine. David
  10. D

    Whats the best way to isolate A2D on a telephone line?

    A/D on telephone line What would be the best way to isolate an A2D (like ADC0803) connected to a telephone line in order to measure DC voltage and AC voltage (while ringging) on it. With AC it is easier as a 600R can be connected between the line and the other side of the transformer may be...
  11. D

    need help in selection of sensors

    For the bulb you can use a simple LDR. For the fan and the refrigerator use a temperature to voltage IC like LM35 or AD59X(Analog Devices). David
  12. D

    need bitmaps for characters...

    Go to Seiko site. You may find it there. David
  13. D

    What are these ICs, help me find datasheets!

    The sp9680 is a very old prescaler, I think it was made by Plessey. David
  14. D

    What does ppm stand for ?

    If a componennt has 100ppm temp. coeficient it means that if the temperature will change with 1 degree celsius from a reference temperature then the value of the component will change with 100ppm which means with +/- 0.0001xcomponent value. For example a resistor of 100k will become 100k +/-10...
  15. D

    Where can I find model for ICL8038 precision waveform generator?

    icl8038 spice I have some in my shop. David Popovits sigma@netvision.net.il

Part and Inventory Search

Back
Top