Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by anujaa

  1. A

    ADC problem in Zigbit module from Meshnetics

    ADC problem ADC is inside the MCU
  2. A

    ADC problem in Zigbit module from Meshnetics

    Hello Friends, I am using Zigbit module of Meshnetics which consists of ATMega 1281. Supply : 3V battery. ADC Specifications: Resolution: 10 Bit Reference Voltage : 1.25V Accuracy :±2 digit LSB. I have applied constant input(1V) to ADC1 pin. For this input, ADC count should be 819.2 But the...
  3. A

    Question about a PT 100 equation

    equação pt100 @ FvM The temperature range is -20 to 400ºC
  4. A

    Question about a PT 100 equation

    Hello all, I have got one Eq, for PT 100 for negative temperature: Rt = R0(1+aT+bT²+cT³(T-100)) R0 = 100 ohms Rt is resistance of PT100 a=0.003069 b=0.000000587 c=4.27x10^-12 T temperature so form this eq what will be the equation for T? means T=? Thanks in advance :D
  5. A

    Measuring negative temperature with PT 100

    Hello All, I want to interface the PT 100 to meshnetics module(Zigbee wireless platform). This module has inbuilt ADC. The temperature range is -20 ºC to 400 ºC. Right now I am using Wheatstone bridge with INA326 instrumentation amplifier. This works well with Range of 0ºC to 400 ºC So, What...
  6. A

    LPC2378 + Nokia 6100 Graphic LCD interfacing

    lpc2378 lcd Hello I want to interface Nokia 6100 Graphic LCD with LPC2378... so can anyone tell me the rough algorithm of it..... LCD driver/controller is GE8 i.e Epson controller S1D15G00. I m using SSP i.e synchronous serial port (same as SPI) for Interfacing. Thanks and regards Anujaa
  7. A

    Looking for low power FPGA (less than 5k system gates)

    Re: Low power FPGA Thanks echo ad swapnil... i will consider these points also... regards Anuja
  8. A

    Where to Use FPGA , where CPLD or DSP : Selection Factors

    Re: Where to Use FPGA , where CPLD or DSP : Selection Factor Mostly FPGAs are used for algorithm implementation..... regards Anuja
  9. A

    Need "CMOS VLSI Design" by Harris and Waste

    cmos vlsi book -index the ebook copy is availabel...... u can search on net..... regards, Anuja
  10. A

    Looking for low power FPGA (less than 5k system gates)

    hello i want to use low power FPGA in my project. Low power means the system gates of FPGA shuld less than 5K. i want to go for Xilinx so is ther any FPGA in xilinx having system gates less than 5K??? Thanks and regards Anuja
  11. A

    How to store data coming from UART in LPC 2378 and display it on GLCD?

    Re: LPC 2378 Hi Bobi.... Thanks for the reply!! Can u please send me the link for the 'embedded artists' for the software. Thank u once again!! Anuja.
  12. A

    How to store data coming from UART in LPC 2378 and display it on GLCD?

    Hello, I m working on LPC2378 (ARM7). I want to store data coming from UART in controller as well as display the data on Graphic LCD... so how to do this??? i ve reached up to display received data on Hyper terminal Anuja
  13. A

    [SOLVED] How to tell the differece between MII & RMII interface?

    Can any one tell me the differece between MII & RMII interface.... or what is MII & RMII ? n how to use those interfaces for ethernet PHY inteface thanks Anuja
  14. A

    Lattice FPGA clocking??????

    hiiii dipti can u send me the schematic of the same?????? thanks n regards Anuja
  15. A

    Lattice FPGA clocking??????

    hiii dipti, wel i m facin same problem with lattice... i think u can not use those pins which is not having PLL as dual function
See more

Part and Inventory Search

Back
Top