Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by amirengineer

  1. A

    [Moved] Vehicle Monitoring System with GPS and GSM - PIC18F46k22

    Re: Vehicle Monitoring System with GPS and GSM - PIC18F46k22 i think you have a problem in this function void string(char q) { while(q) disData(q++); } try to use "Pointer" instedof a char...let it like this void string(char *q) { while(*q != 0) //...
  2. A

    an ISSUE with the SIM900...POWER Key Problem

    I had SIM900 Shield and i use a 12V-2A power adapter , the Power Led is light on when i connect the power, but when i press the power key it was lighting the STA's LED but now nothing is happening to that led....i checked all the voltages on the I/O to the LDO,Power Pins of the SIM900 &...
  3. A

    To be a Good MMIC Designer, Should i Study Anlog CMOS IC design?

    thanks to all of you for your support i think i knew from where to start ....
  4. A

    To be a Good MMIC Designer, Should i Study Anlog CMOS IC design?

    So would you Nominate a book or something to start with?
  5. A

    To be a Good MMIC Designer, Should i Study Anlog CMOS IC design?

    Do you mean by RF and Microwave fundamentals--->the Circuits point of view or the phenomena(Maxwell Eq. & those stuffs) point of view?,
  6. A

    To be a Good MMIC Designer, Should i Study Anlog CMOS IC design?

    Well, I want to know the direct (street forward) Path to be a professional MMIC Designer & do i need to start with Analog CMOS Design? & if the answer is NO, what are the Subjects that i should study and by what sort?
  7. A

    If anybody need help in EAGLE, ask me in this POST !

    what about the lines? if i use components that work in the 800MHZ range should i do it with microstrip lines or it can be with normal lines ?
  8. A

    If anybody need help in EAGLE, ask me in this POST !

    unfortunately there is nothing like 8-Lead Lead Frame Chip Scale Package [LFCSP_VD] in the library of the software...if you have it , please send it..I'll try to make the symbol..anyway thanks for your great helps.
  9. A

    If anybody need help in EAGLE, ask me in this POST !

    thanks alot Keith you are fantastic ...I'm reading the Tutorial it looks wonderful..thanks alot by the way the IC no. is ADL5322
  10. A

    If anybody need help in EAGLE, ask me in this POST !

    IC that i want to designe HI thanks for ur helps but please tell me ,how can i design an IC package if it's not in the libraries?...i attache the IC ...I'll be very grateful if you helped me in designing it
  11. A

    a little help in an RF VCO's Data sheet

    thank you very much, that's helps alot
  12. A

    a little help in an RF VCO's Data sheet

    Hey every body this is my 1st subject so i would be very grateful if you Expert ppl help me with those terminologies & the function of each (this info. is broughted from a VCO's Data sheet): *Harmonic Suppression (2nd Harmonic) *Pushing ( in MHz)..is this the frequency of the Tuning...
See more

Part and Inventory Search

Back
Top