Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Wish to buy EPC17 transformer ferrite/bobbin/clamp

C

cupoftea

Advanced Member level 6
Advanced Member level 6
Joined
Jun 13, 2021
Messages
3,041
Helped
62
Reputation
124
Reaction score
139
Trophy points
63
Activity points
15,918
Hi,
We wish to make some EPC17 flyback transformers.

We wish to buy the following……..

BEPC-17-119GA (Former)
FEPC-17-A (Clamp)
PC44EPC17A080 (Gapped ferrite half for AL=80)
PC44EPC17-Z (ungapped ferrite half)

….Do you know where to buy?, they are not on digikey, pulse electronics, mouser, RS, Farnell, Kaschke, cosmos, Elna…or anywhere else
 
Sort by date Sort by votes
If you haven't misunderstood it, you need a metal clamp for fixing the framework when winding the transformer. If so, we suggest you find a metal processing factory to customize and use aluminum ingot cutting for processing.
 
Upvote 0 Downvote
cupoftea said:
Hi,
We wish to make some EPC17 flyback transformers.

We wish to buy the following……..

BEPC-17-119GA (Former)
FEPC-17-A (Clamp)
PC44EPC17A080 (Gapped ferrite half for AL=80)
PC44EPC17-Z (ungapped ferrite half)

….Do you know where to buy?, they are not on digikey, pulse electronics, mouser, RS, Farnell, Kaschke, cosmos, Elna…or anywhere else
Click to expand...
kevin@hengchuangxin.com
 
Upvote 0 Downvote

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top