Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What type noise is that

Status
Not open for further replies.
S

savage67

Member level 1
Joined
Sep 25, 2006
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,587
When i short connect probe pins to the same node (for example power ground) on the PFC circuit, oscilloscope displays some kind of noise against displaying zero voltage.

What cause this type of noise? Common mode or differential mode?

How one explain this issue.

I used passive probe and isolated channel oscilloscope

Thanks for the help
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top