Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What to use to extract the PMOS and NMOS primitive gates?

Status
Not open for further replies.

jagannathrao

Newbie level 4
Joined
Feb 21, 2006
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,321
Are we extracting the pmos and nmos primitive gates using QRC or starrcxt tool.

I belive that all the information is present in the .model statements.

What is your openion ?
 

Re: extraction

Hi..
I am not clear what you are asking.
From what I understood you are just confirming what information do we get from extraction.
Extraction only gives the parasitic information about capacitors and resistances and sometimes inducatance also. It does not convey any information about transistors behavior. But it certainly gives the metal capacitance between gate and source/drain which can affect device operation but it does not tell about mobilty or device capacitance.

I hope it helps
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top