Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is a charge pump ?

Status
Not open for further replies.

Johnson

Advanced Member level 2
Joined
Oct 4, 2004
Messages
520
Helped
28
Reputation
56
Reaction score
7
Trophy points
1,298
Activity points
3,613
What is charge pump, and where I can find more info about it? I mean which book?
 

Re: Charg Pump

Johnson said:
What is charge pump, and where I can find more info about it? I mean which book?

You don't need a book with 1000 pages to understanding a charge pump.
Google to ICL7660 from Intersil. In the datasheet is a detailed discription.

Gomez
 

Re: Charg Pump

Gomez, thank you very much for help.
I found it, especially App notes was really useful.
It seems that this type of regulators are useful just for small currents!
What do you suggest?
 

Re: Charg Pump

In pll design , charge pump is switch current source.

best regards





Johnson said:
What is charge pump, and where I can find more info about it? I mean which book?
 

Re: Charg Pump

Johnson said:
Gomez, thank you very much for help.
I found it, especially App notes was really useful.
It seems that this type of regulators are useful just for small currents!
What do you suggest?

Yes thats right. For small currents you need no choke with a charg pump. But for more current you need a boost converter (or inverter).

Gomez
 

Re: Charg Pump

Johnson said:
What is charge pump, and where I can find more info about it? I mean which book?

charge pump is simply a circuit you can force current in or out, generally such circuit has a capacitor to be a storage of charge
 

Re: Charg Pump

Is it possible to set same charge pump current for complete bandwidth of synthesizer because i need to change the current to improve phase noise at different frequency my phase noise is diffrent when i operate my pll from 5.9 Ghz to 6.1 Ghz with same charge pump current.

Thanks & best Regards
 

Re: Charg Pump

refer this
CMOS Mixed-Signal Circuit Design by R. Jacob Baker

you can find more info on this circuits
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top