video and image processing using xilinx system generator

[nouja]

hey all
i'm new to FPGA and system generator and i'd like to learn hw to load a video and process it using xilinx system generator in order to get the bitstream and program the FPGA ,,,, could anyone can help me with topics or videos to learn that ! ! ! !
thnxxx

 

[sameh_yassin99]

Hi there,

Here you can start reading the following application note "XAPP1136.pdf" entitled "Integrating a Video Frame Buffer Controller (VFBC) in System Generator Application Note"

https://www.xilinx.com/support/documentation/dt_sysgendsp_sysgen11-1.htm

You have to spend almost 2 weeks until you start a real example.

regards,

 

[hodahussein]

Dear: sameh_yassin99

i need to know how to store or load image on fpga spartan 3E in order to apply some digital processing in my master
so 1st step: I must load the image on fpga,(i have spartan 3E kit)
can you help me

really i wait your reply for importance
best regards

 

[mhmhmh]

Dear: sameh_yassin99

i need to know how to store or load image on fpga spartan 3E in order to apply some digital processing in my master
so 1st step: I must load the image on fpga,(i have spartan 3E kit)
can you help me

really i wait your reply for importance
best regards

Hi hodahussein,

Which Spartan 3E kit do you have ? Does it come with USB or Ethernet connections on board ?

Cheers

 

[hodahussein]

Dear: sameh_yassin99

thank's for reply

Spartan-3E Starter Kit board (Xilinx XC3S500E Spartan-3E FPGA)
yes there is a Ethernet connection on board
also On-board USB-based FPGA/CPLD download/debug interface

wait your reply
best regards