verify failed at 000h

[rukshankb]

pic verify failed

Hi
I'm a beginner to pic programming.I hope to use pic 16F84A.I've made 4 pic programmer.It likes JDM programmer.But i got above error always.
If you have any suggestion about that refer it
I got the programmer circuit from the following site,

https://picpro.6te.net

Regards

 

[pasicr]

Hi,
this message is from many problems,
communication error, hardware error, bad board....
JDM sometimes have problem with com port current,
Search on eda forum, you will find many good and tested programmers for PIC Micro,
regards
p.s. read this https://www.olimex.com/dev/index.html
the very good programmer PIC-PG2

 

[victor de silva osores]

jdm verified failed at 000h

no espik ingle very!!!the erro is in the pin board the
compilter ,pin DTR not comunicaychom"nao ha comunicaçao"

 

[jimjim2k]

very failed at 000h

no espik ingle very!!!the erro is in the pin board the
compilter ,pin DTR not comunicaychom"nao ha comunicaçao"

please write English in main English forum. you may use from Google or Altavista (av.com) translate services to translate into english.

tnx