variable voltage gate driver recomindation

[yefj]

Hello,I have this good component which coould drive 4A its output floating voltage shown below.
The floating voltage is directly equals to its supply voltage.


However is there a gate driver just like this where the output could be tuned by some pin resistor connection?

Thanks.

https://www.ti.com/lit/ds/symlink/ucc5304.pdf?ts=1715329802200&ref_url=https%253A%252F%252Fwww.mouser.co.il%252F

 

[FvM]

In applications where we need adjustable gate drive voltage, we are using a variable voltage regulator for driver supply.

 

[yefj]

Hello FVM ,I have this configuration I used before.
My load Is not TGA2590 but the UCC5304 VDD supply VDD pin.
what current do i need to supply with this regulator according to UCC5304 ?
6A continues?
Thanks.

https://www.ti.com/lit/ds/symlink/ucc5304.pdf?ts=1715329802200&ref_url=https%253A%252F%252Fwww.mouser.co.il%252F

 

[FvM]

Gate driver draws only significant current during switching. Use sufficient bypass capacitor > 1 uF.