[SOLVED] Use *.prm files in AWR Microwave Office

[Jorgito1]

Hi,
I'm trying to simulate an oscillator using a non-linear method.
I have got a BJT transistor from philips (BFR93A) and i got BFR93A_SPICE.PRM.

Can i import the .prm extension to use in MWO? Should i look for another one?
I think i can use it but i don't know how.
Thanks.

------------------------------------------------------------------------------------------
* Filename: BFR93A_SPICE.PRM
* BFR93A SPICE MODEL
* PHILIPS SEMICONDUCTORS
* Date : September 1995
*
* PACKAGE : SOT23 DIE MODEL : BFR91A
* 1: COLLECTOR; 2: BASE; 3: EMITTER;
.SUBCKT BFR93A 1 2 3
Q1 6 5 7 7 BFR91A
* SOT23 parasitic model
Lb 4 5 .4n
Le 7 8 .83n
L1 2 4 .35n
L2 1 6 .17n
L3 3 8 .35n
Ccb 4 6 71f
Cbe 4 8 2f
Cce 6 8 71f
*
* PHILIPS SEMICONDUCTORS Version: 1.0
* Filename: BFR91A.PRM Date: Feb 1992
*
.MODEL BFR91A NPN
+ IS = 1.32873E-015
+ BF = 1.02000E+002
+ NF = 1.00025E+000
+ VAF = 5.19033E+001
+ IKF = 8.15511E+000
+ ISE = 1.39029E-014
+ NE = 1.51292E+000
+ BR = 1.76953E+001
+ NR = 9.94038E-001
+ VAR = 3.28032E+000
+ IKR = 1.00000E+001
+ ISC = 1.04297E-015
+ NC = 1.18993E+000
+ RB = 1.00000E+001
+ IRB = 1.00000E-006
+ RBM = 1.00000E+001
+ RE = 7.63636E-001
+ RC = 9.00000E+000
+ EG = 1.11000E+000
+ XTI = 3.00000E+000
+ CJE = 2.03216E-012
+ VJE = 6.00000E-001
+ MJE = 2.90076E-001
+ TF = 6.55790E-012
+ XTF = 3.89752E+001
+ VTF = 1.09308E+001
+ ITF = 5.21078E-001
+ CJC = 1.00353E-012
+ VJC = 3.40808E-001
+ MJC = 1.94223E-001
.ENDS

 

[Manjunatha_hv]

Hello,

Yes you can import *.prm file into AWRDE MWO....
Just Right Click on Circuit Schematics & then select Import Netlist then choose the file type as All Files...
Now choose the Netlist as PSICE (*.cir) file format...
Then finally create new Circuit Schematic & add this model as SubCircuit...

---manju---

 

[Jorgito1]

Thank you very much Manju. Just what i was looking for.