Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Unable to generate Fabrication drawing in allegro 16.3 in .art format

Status
Not open for further replies.

satanam

Newbie level 5
Newbie level 5
Joined
Sep 15, 2011
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,353
Hello All,

I am trying to generate fabrication drawing in .art format in allegro 16.3. I have used a Dsize fab symbol in Class Drawing format -> subclass outline. Also added assembly notes and layer stackup information in Class Drawing format(outline, title block).
When i try to generate the .art file, only the NC drill is transferring in artwork file. I am unable to see the drill legend, outline and assembly notes. (I have chosen the appropriate subclasses in drawing format in visibility window and have also updated the DRC)

Please help me to generate the complete fabrication file in .art format.

Thanks in advance,
Satanam
 

Hello Satanam,

First go to artwork,film control,fab layer then right click on any subclass under fab layer,you will get add option and in that enable which all you want to display in fab then click on ok.

hope it helps you

Regards
prathibha
 
  • Like
Reactions: satanam

    V

    Points: 2
    Helpful Answer Positive Rating

    satanam

    Points: 2
    Helpful Answer Positive Rating
Also place NC legend from Artwork tab without that you will not see drill table and drill symbols in PCB
 
Thanks for the inputs!

I had already placed the NC legend from artwork and had selected the required subclasses under the fab layer, but unfortunately when i hit "create artwork" buttom, all I get in the .art file is the drill symbols. I still don't get the drill legend table, fab notes and the outline.
Please help.

Thanks in advance.
Satanam
 

when you are generating artwork film.
please have a look whether you have given some value in undefined line width column in the film options.
if no give some value.ex-5,8...i think this would help you.

---------- Post added at 10:57 ---------- Previous post was at 10:56 ----------

when you are generating artwork film.
please have a look whether you have given some value in undefined line width column in the film options.
if no give some value.ex-5,8...i think this would help you.
 
  • Like
Reactions: satanam

    V

    Points: 2
    Helpful Answer Positive Rating

    satanam

    Points: 2
    Helpful Answer Positive Rating
Have you drawn "photoplot line"/
it is drawn in manufacturing class.
if you have drawn check for the dimensionsin artwork in "film size limit".

One more thing have you addede these layers in your artwork file for fab drawing?
 
  • Like
Reactions: satanam

    V

    Points: 2
    Helpful Answer Positive Rating

    satanam

    Points: 2
    Helpful Answer Positive Rating
Hello Shabu,
Thanks for the response. I had given value to undefined line width.

Hello Ricky,
Thanks for the response. I had added photoplot line and also added required layers to fab drawing. I have also increased the "film size limit", but still I am unable to see the drill legend, fab notes and fab outline.

Please suggest further.

Thanks,
Satanam
 

can you paste a snap shot of your drill drawing layer or upload your brd file so that we could have a better look at it to suggest you something
 

Hi satanam,

The drill legend is genertaed in the class Manufacture --> sublclass please see the image.

Also add the these class & subclass in the .art file mergeing.

try it.
 

Attachments

  • Untitled.jpg
    Untitled.jpg
    180.5 KB · Views: 167

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top