zzm_3392
Junior Member level 2
Hi,
The receiver works in the frequency from 10kHz to 500kHz. But because there exist many strong interferences in this frequency on power line, i want to divide it into several frequency band, such as 10-100kHz,100-200kHz,200-300kHz,300-400kHz,400-500kHz. So the receiver can work in another band when there exists interference.
The source impedance of the tunable BPF is 1k Ohms, and load impedance is 10k Ohms. I'm not sure Whether it can be realized by LC or other method. If ok, please give me some advices. Or if you have another better idea, please let me know.Thanks.
Best Regards.
The receiver works in the frequency from 10kHz to 500kHz. But because there exist many strong interferences in this frequency on power line, i want to divide it into several frequency band, such as 10-100kHz,100-200kHz,200-300kHz,300-400kHz,400-500kHz. So the receiver can work in another band when there exists interference.
The source impedance of the tunable BPF is 1k Ohms, and load impedance is 10k Ohms. I'm not sure Whether it can be realized by LC or other method. If ok, please give me some advices. Or if you have another better idea, please let me know.Thanks.
Best Regards.