raed_microwave
Advanced Member level 4
- Joined
- Jul 26, 2008
- Messages
- 107
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,296
- Location
- Kassel, Germany, Germany
- Activity points
- 2,066
Total Power Radiometer
Hi dears,
I'd like to design an LNB that can be used for Total power radiometer by connect the LNB with square-law detector and low-pass filter in series. The radiometer will be used to detect hot spots "high temperature". I need your help to find a way to simulate like this system. My problem starts that how can I find a model to realize a thermal noise source and connect this model to the input of LNB.
If you have an example will be very helpful for me.
Thanks in Advance
Hi dears,
I'd like to design an LNB that can be used for Total power radiometer by connect the LNB with square-law detector and low-pass filter in series. The radiometer will be used to detect hot spots "high temperature". I need your help to find a way to simulate like this system. My problem starts that how can I find a model to realize a thermal noise source and connect this model to the input of LNB.
If you have an example will be very helpful for me.
Thanks in Advance