Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

timing analysis in digital circuits

Status
Not open for further replies.

veenashree89

Member level 2
Member level 2
Joined
Dec 11, 2010
Messages
42
Helped
9
Reputation
18
Reaction score
9
Trophy points
1,288
Location
BANGALORE
Activity points
1,581
what is critical path analysis and false path analysis? why it is required?
suggest some books to study this.
 

The critical path analysis indicates with clock element to clock element path contains the longest (in timing point of view) path.
That indicates the maximum speed of the design.
The path could be from input to clock element or clock element to output or input to output.
By clock element, I mean flip-flop, clocked memories..

The false path analysis, I beleive (because I don't call like this), it's to check the SDC doesn't provide unwanted false path. When a path is declare as false path, the timing engine does not take account this path, and then does not check if this one could be the critical or not.

The false path is provide by the SDC to synthesis tool and P&R & STA.
The critical path is analyse along the flow, synthesis-P&R-STA.
 
Critical path is the path in the circuit that has maximum timing violation or that has maximum delay. So the frequency of the circuit is dierctly dependant on the critical path and hence its analysis.

False paths are those paths which may be physically present, but logically, it may be an invalid path. For eg if there are two Muxes connected serialy with a common select line, the path from A pin of mux 1 to B pin of Mux 2 is invalid and hence need not be taken into consideration for timing analysis
 
false path means that the circuit contains asynchronous logic.
 

search for Static timing Analysis or STA ....u will get lot of material..

STA on Nanometer designs by J.Bhaskar is a good book
 
False path is path that exists in the design but never dynamically sensitized .

Critical path is the longest delay path in the design
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top