Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

there is a relation connecting s parameters and z parameters

Status
Not open for further replies.

vedaprabhu

Junior Member level 3
Joined
Aug 2, 2006
Messages
26
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
1,472
s to z parameter matrix

In such a case why worry about introducing s parameter matrix and so on ..smith chart...etc?!

one can directly apply the formula for getting s parameters once he knows Z and U matrix....
 

Re: there is a relation connecting s parameters and z parame

It depends on your purpose whether you need S parameter or Z-parameter. If you want to look at the reflection why do you want to calculate Z first? Again, if you want to see resonance, it is better to see the Z-parameter (however, smith chart gives you the resonance).

One more point, many characteristics of HF are clear from smith chart, which cannot be directly seen from Z parameters.
 

Re: there is a relation connecting s parameters and z parame

"Microwave Transistor Amplifiers, Analysis and Design" , Guillermo Gonzales ; section 1.9 relates the various scattering parameters. It has the relationships you seem to be seeking.

(I have only paper copies)
 

Re: there is a relation connecting s parameters and z parame

Hello
S=(Z-R)*(Z+R)^-1
Where Z-z-matrix, R-diag real matrix of wave impedances.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top