OZZAA
Member level 1
I found that many desigers put a series resistance with the gate terminal of the cascode amplifiers.
as shown in the attached figure (circled by red circles)
Is that only for increasing the stability factor?
or it has other functions.
-------------------------------------------------------------
if the stability are already considered.
we can remove this resistance as shown in the following cascode circuit (circled by red circle).
Thanks in advance
as shown in the attached figure (circled by red circles)
Is that only for increasing the stability factor?
or it has other functions.
-------------------------------------------------------------
if the stability are already considered.
we can remove this resistance as shown in the following cascode circuit (circled by red circle).
Thanks in advance