Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SIM908 problem with Vbat and GND pin

Status
Not open for further replies.
J

JUBAYER

Junior Member level 1
Joined
Sep 15, 2012
Messages
16
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,386
i was working on a GSM based system with SIM908 and it was working perfectly. After a while i restarted the system and found that GND and Vbat pins are shorted. i really need help on this issue. what to do now?
 

use DMM to check which pin has been short. or check and see which component been blown.

so far i saw my friend doing this project does not faced any issue on GND and Vbat shorted
 

i have unplugged the module and checked . all GND and Vbat pins are shorted internally . i really don`t understand why it`s behaving like this?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top