sodittlse
Newbie level 1
hello
I'm new to GPRS and m2m communication. I'm trying to send datas from vehicules to a distant server.
I’m using a GM862-GPS from telit and I want to send data to a socket with these commands :
AT+CPIN=XXXX
AT+CGREG=1
AT&K=0
AT+CGDCONT= 1,”IP”,”orange”
AT#USERID=””
AT#PASSW=””
AT#GPRS=1″
AT#SKTD=1,8000,”84.222.124.34”,0,0″
This last command returns “CONNECT”. But informations written on the serial port after that aren’t received on the socket. I tested the destination socket with another application and datas are correctly sended.
Thanks in advance !
I'm new to GPRS and m2m communication. I'm trying to send datas from vehicules to a distant server.
I’m using a GM862-GPS from telit and I want to send data to a socket with these commands :
AT+CPIN=XXXX
AT+CGREG=1
AT&K=0
AT+CGDCONT= 1,”IP”,”orange”
AT#USERID=””
AT#PASSW=””
AT#GPRS=1″
AT#SKTD=1,8000,”84.222.124.34”,0,0″
This last command returns “CONNECT”. But informations written on the serial port after that aren’t received on the socket. I tested the destination socket with another application and datas are correctly sended.
Thanks in advance !