Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Reg: The Solution needed for the UART Reception problem on LPC2478

Status
Not open for further replies.
C

caniget

Newbie level 5
Joined
Dec 29, 2007
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,373
Dears,
I am developing the Industrial Automation Application product. On that i am using open RTOS. I am facing out the following error.
I am trying to receive set of packets from zigbee which i have interfaced with the microcontroller. But i couldn't able to receive the data which is more than 16 bytes. i suspected it may occur, because of zigbee. So, i tested the case with Hyper termainal. While doing so, i am getting the same. so, i am suspecting that it may because of microcontroller. can anyone please give me the suggestion regarding this.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top