Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

problem with post-simulation

Status
Not open for further replies.

LAS.xs

Newbie level 6
Newbie level 6
Joined
May 27, 2007
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,361
Do parasitic parameter extraction using calibre and simulation the netlist with RC parasitic parameter. The result was wrong, and there was warings given.

how to solve the problem?


Warning from spectre during hierarchy flattening.
defineQ: Unit of quantity `Q' is changed from `coul' to `C'.
defineFreq: Unit of quantity `F' is changed from `N' to `Hz'.
Notice from spectre during topology check.
No DC path from node `I131._net0' to ground, Gmin installed to provide path.
 

The first two warnings are new to me. But the last warning is due to no connection clearly. Probably the "net0" specified might be connected to ground which the layout tool could not identify correctly. Check that the node is connected to the other correct node by modifying the extracted netlist.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top