imbichie
Full Member level 6
Hi friends,
I wants to phase shift the clock which is used in the process, means the clock is used in the sensitivity list. For example, my clock is 200 Mhz, so i wants to generate a clock with same frequency but different phase (say, 90 or 45 degree). the thing we have to noted is that the same clock is used in the process statement.Also there is no other clock available which is higher than this.
So, is there any way to generate a phase shifted clock without using any PLL or DLL.
Thanks in Advance
Regards
imbichie
I wants to phase shift the clock which is used in the process, means the clock is used in the sensitivity list. For example, my clock is 200 Mhz, so i wants to generate a clock with same frequency but different phase (say, 90 or 45 degree). the thing we have to noted is that the same clock is used in the process statement.Also there is no other clock available which is higher than this.
So, is there any way to generate a phase shifted clock without using any PLL or DLL.
Thanks in Advance
Regards
imbichie