Safiya
Junior Member level 2
I have designed 5MHz bw 2stage CMFB diff amp. but i could not adjust the Phase Margin using R,C values for the compensation,
in my case when i achive PM = 60 , bw reduces to 800kHz. is there any method to compensate this amp of BW 5M or 3MHz with enough PM.
Regards,
Safiya
in my case when i achive PM = 60 , bw reduces to 800kHz. is there any method to compensate this amp of BW 5M or 3MHz with enough PM.
Regards,
Safiya