Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PFC with pulsing load

Status
Not open for further replies.
C

cupoftea

Advanced Member level 5
Joined
Jun 13, 2021
Messages
2,659
Helped
54
Reputation
108
Reaction score
116
Trophy points
63
Activity points
14,000
Hi
The attached is IAC(in), V(out) and i(out) of a 400W peak PFCd SMPS with vac in of 100VAC.
(BCM boost PFC then Series resonant converter on open loop)
The Load is pulsing repeatedly 10ms ON, 10ms OFF (400W when ON)
The IACin shows a 10Hz oscillation. Since load pulse is 50Hz, and Mains is 60Hz…..the 10Hz is the difference frequency, is this what we are seeing?
 

Attachments

  • Waveforms of PFCd PSU on pulsed load.jpg
    Waveforms of PFCd PSU on pulsed load.jpg
    168.9 KB · Views: 78

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top