tzg6sa
Member level 2
I have noticed, that the operating point is calculated as many times as many analysis need it. For example if one run a dc, an ac and a stb simulation, the operating point will be calculated 3 times. Sometimes the calculations take a while. How can I force the Simulator to use the result of the dc simulation?
I have checked the prevopppoint radio box in the options of AC and STB analysis.
SPECTRE was used with Analog Design Enviroment from Cadence.
I have checked the prevopppoint radio box in the options of AC and STB analysis.
SPECTRE was used with Analog Design Enviroment from Cadence.