[SOLVED] not sure about pic_start configuration

[EgrK]

Hellow
I want to set the configuration bits (pic16f690) according to this line

Internal 8MHz oscillator (INTIO)

Which one of the following will match?

1- RC Oscillator CLKOUT function on Ra4/osc2/CLKOUT pin,rc on Ra4/osc1/CLKIN
2- Oscillator INTOSC oscillator CLKOUT function on Ra4/Osc2/CLKOUT pin, I/O function Ra4/OSC1/CLKIN
3- RC Oscillator CLKOUT function on Ra4/osc2/CLKOUT pin,rc on Ra4/osc1/CLKIN
4- RCIO oscillator I/O function on Ra4/osc2/CLKOUT pin,rc on Ra5/osc1/CLKIN
5- INTOSCIO Oscillator I/O function on Ra4/Osc2/CLKOUT pin, I/O function on Ra5 /Osc1/CLKIN
6- INTOSC Oscillator CLKOUT function on Ra4/Osc2/CLKOUT pin, I/O function on Ra5 /Osc1/CLKIN
7- Ec: I/O function on Ra4/osc2/CLKOUT pin, CLKIN on Ra5/osc1/CLKIN
8- Hs oscillator High speed crystal/resonator on Ra4 osc2/CLKOUT and Ra5/osc1/CLKIN
9- Xt Oscillator crystal/resonator on Ra4/osc2/CLKOUT and Ra5/osc1/CLKIN
10- Lp oscillator low-power crystal on Ra4/osc2/CLKOUT and Ra5/osc1/CLKIN

 

[DineshSL]

Only 2,5 & 6 can be used. Then for 8MHz, select the oscillator control bits.