Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Noise Figure of LNA when high-temperature operation

Status
Not open for further replies.

heritage

Newbie level 5
Joined
Feb 13, 2007
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,339
How to get good NF when LNA operate at high temperature?
 

Re: Noise Figure of LNA when hign-temperature operation

measure the Ropt for this temp , and match for this Ropt

khouly
 

Noise Figure of LNA when hign-temperature operation

Thanks.
But I have made NF=NFmin at normal temperature(27C), and I find NF is approximate to NFmin at high temperature(125C). The NF rises
about 0.6dB.
 

If the LNA is operating on both, low and high temperature, one thing that you can do is to make a compromise, and do the NF matching somewhere between temperatures.
Here you can find a table that shows how NF is increasing with temperature.
https://www.satsig.net/noise.htm
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top