ponnus
Full Member level 2
- Joined
- Mar 17, 2011
- Messages
- 142
- Helped
- 8
- Reputation
- 16
- Reaction score
- 8
- Trophy points
- 1,298
- Location
- Cochin, INDIA
- Activity points
- 2,226
Hai friends,
I am working on LB150 weather station and able to receive and decode all nmea sentences from weather station using microcontroller. But, now the weather station has default settings, that makes it to send data continuously. I don't need all these sentences. So, I tried to disable all the commands and enable some of them. But it is not accepting any command send by me. I'm sure that the checksum is correct. The sentences i used are:
$PAMTC,EN,ALL,0*1D\r\n //Disables all sentences from weather station
$PAMTC,EN,S*13\r\n //Save settings to non-volatile memory
I tried to disable some of the commands separately, but that too not working. If you have any idea, please help me......
I am working on LB150 weather station and able to receive and decode all nmea sentences from weather station using microcontroller. But, now the weather station has default settings, that makes it to send data continuously. I don't need all these sentences. So, I tried to disable all the commands and enable some of them. But it is not accepting any command send by me. I'm sure that the checksum is correct. The sentences i used are:
$PAMTC,EN,ALL,0*1D\r\n //Disables all sentences from weather station
$PAMTC,EN,S*13\r\n //Save settings to non-volatile memory
I tried to disable some of the commands separately, but that too not working. If you have any idea, please help me......