Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Needed Help regarding EEPROM

Status
Not open for further replies.
1

1230

Member level 3
Joined
Jun 18, 2002
Messages
62
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
355
i am having an 93c46 ATMEL EEPROM, can this IC be copied to another blank EEPROM without knowing Hex code, if yes then how.
or is there posibility to know the hex code.
 

Hi,
Yes you can copy the hex file into another EEPROM using programmers for such devices. Some of the microcontroller programmers can program, read and copy such devices also.

Regards,
Laktronics
 

You need to find a Universal Programmer that is compatible with that IC. You'll need to also get the appropriate adapters for the IC.

These usually allow you to read the memory of a programmed device and store it to a file (such as .hex) which can subsequently be written to another device.
 

These devices can be easily read and written by PonyProg
 

FvM is correct

Pony prog is easy to use. just read eeprom, save that file.

Now you can make any number of copies you want.

Regards
Nandhu
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top