Need info for 10/100 Ethernet Controller

[atmelAVR91]

Need info for 10/100 Ethernet Controller with 10/100 PHY for interfacing with NXP ARM Microcontroller.

 

[cydi]

Did you try LANC911?

 

[angelote]

Better try whith LAN91C111.

 

[7rots51]

for embedded systems this is lower cost and smaller for 8bit app. ENC28J60 from microchip.

 

[vaibhav.k]

ENC28J60
This Ethernet controller is really very nice only 28 pin PDIP or SMD package available.
For Hardware point of u also.It is interface through SPI interface so hardware requirement reduces.Microchip peoples are providing TCP/IP stack also.U get referance designs also.

 

[Beeblebrox]

It took me a couple of days to understand ENC28J60 and implement Microchip TCP/IP stack. The implementation process is very straightforward, no problems at all. The Microchip stack was easy to configure (just editing a couple of header files). Unfortunately, the stack is optimized for PIC MCUs and for Microchip C18 and Hi-Tech PICC-18 compilers only. You have to find an ARM TCP/IP implementation yourself.

 

[angelote]

Remember that ENC28J60 is only 10Base-T.