Nedd help for IC 6.1 icfb setting (IC 6.* setting)

[kapilsn]

IC 6.* setting

In latest ICFB ,if we have vias stacked on top of each other ,they get attached and we are not able to move or select a particular vis in the stack.

Any idea of any switch present which can disable this?

Kapil

 

[oermens]

IC 6.* setting

if you don't like via stacks then don't use them... add individual via arrays and arrange them as you like... or you can use via cuts on specific layers

 

[kapilsn]

Re: IC 6.1 icfb setting

Hi oermens,
Even if we place vias one by one on top of each other,they get attached ones we keep they on top of each other.and at a later stage iof we want to delete one of the vias,it doesnt allow me to select that particular vis.Instead the all the vias which are placed are selected.

Kapil

 

[oermens]

if you want to remove individual vias from an array use via cuts or flatten the array and delete the ones you like