Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

NAND or NOR which is better preferred

Status
Not open for further replies.

thanuvi

Newbie level 3
Newbie level 3
Joined
May 17, 2007
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,305
among the universal gates(NAND and NOR) which is better preferred and why
 

CMOS NAND is better than NOR as size of all transistors is equal for 2-input NAND.
Size of PMOS is bigger than size of NMOS for NOR.
So NAND layout area is smaller.
 
NAND is preferred because you can create other Logic gates utilizing lesser number of NAND than NOR. That makes NAND the universal gate
 

I like NANDs because I do not have stacked PMOS devices. Anyway I prefer 2input NAND over 4 input which is max. number of inputs in my book
 

2-input CMOS NAND is better than 2-input CMOS NOR, because NAND logic give almost equal rise time and fall time. As PMOS are parallel, so total PMOS resistor will decrease and NMOS are in series, so total NMOS resistor will increase. means in this condition both net NMOS and PMOS will have equal resistor to produce same rise and fall time
 

NAND always preferable in terms of logical effort and speed due parallel structure in pull up circuit.
 

well dynamic NOR is also small and fast. but it has higher activities
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top