Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Motor Control voltage issue

Status
Not open for further replies.
A

ankansinha

Newbie level 3
Joined
Jun 16, 2008
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,308
Hello Everybody

I am working into BLDC motor control circuit which operates on 24V. It has six step commutation process converting DC to AC-3 Phase for BLDC motor.

Now the software file which i received from the client for the motor control has writtenwithin that the maximum voltage is 32V for overvoltage detection.Is that so for the motor supply voltage which should be 24V+5% and 25% tolerance or is there some any other reason.

regards
Ankan
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top