Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

mikroC compiler problem

Status
Not open for further replies.

oday_albadarneh

Newbie level 6
Newbie level 6
Joined
Dec 20, 2011
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,380
Hi all
I was working on my project for more than month i stuck in a problem that the hardware serial communication doesn't work or it sends me a rubbish values.
may any one help me to convert my code to hex file on his compiler and try it on real pic ?!!
i will be thankful to all of you, i need it as soon as possible.
the attached code needed to be included with default setting for serial connection with 4 Mhz XT
Code:
// variables
float vc1,vc2,vc3,beta;
char vc1_txt[15],vc2_txt[15],vc3_txt[15],beta_txt[15],adder_txt[15];
int check;
char uart_rd,adder,lock,add1,add2,receive;

void calculate_beta ()
{
    beta = ((5 - vc1)* 1000000) / ((5-.7)*3700 ) ;
    FloatToStr(beta,beta_txt);
    Delay_ms(2000);
    UART1_Write_Text(beta_txt);
    Uart1_Write(13);
    Uart1_Write(10);
    Delay_ms (2000);
}

void Calculate_vc1()
 {
    vc1 = ADC_Read(0);
    vc1 = 0.004887585533*vc1;
    if (vc1 <= 0.2 )
         UART1_Write_Text("S");
    else if (vc1 > 0.2 && vc1 < 4.85 )
         UART1_Write_Text("F");
    else if (vc1 > 4.85)
         UART1_Write_Text("C");

    Uart1_Write(13);
    Uart1_Write(10);
    delay_ms(2000);
 }

void Calculate_vc2()
 {
    vc2 = ADC_Read(1);
    vc2 = 0.004887585533*vc2;
    if (vc2 <= 0.2 )
         UART1_Write_Text("S");
    else if (vc2 > 0.2 && vc2 < 4.85 )
         UART1_Write_Text("F");
    else if (vc2 > 4.85)
         UART1_Write_Text("C");

    Uart1_Write(13);
    Uart1_Write(10);
    delay_ms(2000);
 }

void Calculate_vc3()
 {
    vc3 = ADC_Read(2);
    vc3 = 0.004887585533*vc3;
    if (vc3 <= 0.2 )
         UART1_Write_Text("S");
    else if (vc3 > 0.2 && vc3 < 4.85 )
         UART1_Write_Text("F");
    else if (vc3 > 4.85)
         UART1_Write_Text("C");

    Uart1_Write(13);
    Uart1_Write(10);
    delay_ms(2000);

 }

void lock_check ()
 {
     PORTD = lock & 0x0F ;
     delay_ms (1500) ;
     check = PORTD.F4 ;
     if (check == 1)
         UART1_Write_Text("NO GO");
     else if (check == 0)
         UART1_Write_Text("GO");
    Uart1_Write(13);
    Uart1_Write(10);
    delay_ms(2000);
  }

void full_adder (char a , char b)
 {
   PORTB = ( a & 0x0F )+ ( b & 0xF0 );
   adder = PORTC ;
   adder = adder & 0x1F;
   ByteToStr(adder,adder_txt);
   Uart1_Write_Text(adder_txt);
   Uart1_Write(13);
   Uart1_Write(10);
   delay_ms (2000);

 }


void main() {

     ADRESL = 0x00;
     ADRESH = 0x00;
     TRISA  = 0xFF;
     TRISB  = 0x00;
     TRISC  = 0x9F;
     TRISD  = 0x70;
     CMCON  = 0x07;

     UART1_Init(9600);      // Initialize UART module at 9600 bps
     Delay_ms(100);         // Wait for UART module to stabilize



    while (1) {

            UART1_Write_Text("#");
            while(!UART1_Data_Ready());
            uart_rd = UART1_Read();
            UART1_Write_Text("\r\n");
            Delay_ms(500);
            
            if (uart_rd == 0x31) {
            calculate_beta();
            Delay_ms(500);}
            
            else if ( uart_rd == 0x32) {
            Calculate_vc1();
            Delay_ms(500);}
            
            else if ( uart_rd == 0x33) {
            Calculate_vc2();
            Delay_ms(500);}
            
            else if ( uart_rd == 0x34) {
            Calculate_vc3();
            Delay_ms(500);}
            
            else if ( uart_rd == 0x35)
            {
            Uart1_Write(0x61);
            delay_ms(2000);
            UART1_Write_Text("\r\n");
            while(!UART1_Data_Ready());
            lock = UART1_Read();
            lock_check();
            Delay_ms(500);
            }
            
            else if ( uart_rd == 0x36)
            {
            PORTD.F7 =0 ;
            Uart1_Write(0x61);
            UART1_Write_Text("\r\n");
            delay_ms(500);
            while(!UART1_Data_Ready());
            add1 = UART1_Read();
            Uart1_Write(0x62);
            UART1_Write_Text("\r\n");
            delay_ms(500);
            while(!UART1_Data_Ready());
            add2 = UART1_Read();
            full_adder (add1 , add2);
            Delay_ms(500); 
            }
            
            else if ( uart_rd == 0x37)
            {
            PORTD.F7 =1 ;
            Uart1_Write(0x61);
            delay_ms(500);
            UART1_Write_Text("\r\n");
            while(!UART1_Data_Ready());
            add1 = UART1_Read();
            Uart1_Write(0x62);
            delay_ms(500);
            UART1_Write_Text("\r\n");
            while(!UART1_Data_Ready());
            add2 = UART1_Read();
            full_adder (add1 , add2);
            Delay_ms(500);
            }
            
          else
            break ;


    }
}
 

You had the same problem sometime back. Now you have modified your code. right? I think the problem is with your MAX232.
Here are the hex and cof files compiled for 4 MHz.
 

Attachments

  • uart.rar
    12.6 KB · Views: 83
Is it compiled for pic16f877a ?
Has it work on real pic ?!!
 


Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top