Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Microblaze implementation on CPLD

Status
Not open for further replies.
A

aliman8

Junior Member level 1
Joined
Jun 25, 2008
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,395
Hi,
I want to implement Microblaze softprocessor on CPLD .My questions are
1 Is it possible to implement Mblaze on CPLD?
2 has some body done it before.?
3 Is there any other alternative which can be implemented on CPLD.
4.I have seen micro-8 and picoblaze but they are 8 bit .
Thanks in advance for your kind help
Best regards
Ali
 

The answers are:
1- No
2- No because it is not possible
3- No, there are not CPLDs large enough for 32bits processor
4- You answered your own questions here

An FPGA cost about $3 with more than 100 times logic compared to the largest CPLD that costs much much more.

BR,
/Farhad
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top