Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Intercom for four users

Status
Not open for further replies.

tshepomatjebe

Newbie level 5
Joined
Feb 22, 2010
Messages
9
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Location
south africa
Activity points
1,326
design and implement an intercom system that could enable communication between four clients within 10m distance between them.the minimum specifications are mentioned below.

1.any two of the fours users could communicate each other without disturbing other users
2.if any two are using line all four units must show engaged indicator by means of an LED
3.each unit must have a trigger to indicate incoming call,but only the called party's unit should ring
 
Last edited:

radius of 10m (i think meters)
then is this wireless or cable connected,
plz tell ur purpose in detail
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top