Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Installing the Tool chain S3C4510B based dev board

Status
Not open for further replies.

steve_e

Newbie level 1
Newbie level 1
Joined
Mar 28, 2006
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
Hi

We are trying to install the uClinux tool chain for the Samsung S3C4510B test board.

We are getting the below error while running the arm-elf-tools-20040427.sh tool chain


[root@ Samsung_Dev_Bd]# sh arm-elf-tools-20040427.sh
./usr/local/arm-elf/
./usr/local/arm-elf/bin/
./usr/local/arm-elf/bin/nm
./usr/local/arm-elf/bin/strip
tar: Skipping to next header

gunzip: stdin: invalid compressed data--format violated
tar: Error exit delayed from previous errors

Kindly let me know if you have solutions for the same.

Regards

steve
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top