Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

I want to know the balun inductance from the manual

Status
Not open for further replies.
F

fanshuo

Full Member level 5
Joined
Jun 21, 2007
Messages
266
Helped
8
Reputation
16
Reaction score
4
Trophy points
1,298
Location
Netherlands
Activity points
2,746
balun inductance

I want to know the balun inductance from the manual
From the plot below,
It seems the Q is about 24.
in the case when the impedance is 50ohm, then at 2.4GHz the inductance is about 81nH
Am I right?
1782513.jpg
 

balun inductance

well
Q=abs(wL/R)
U got the Q and the R then u can calculate the L
 

balun inductance

if the L is known then you can easily find the C using the oscillation frequency,right?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top