How to use Signal Integrity function in Protel 99SE

[Moriarti]

max485 protel

Hello

I’m have a big problem witch Protel 99SE. I have to check my data line from cross talk, but I couldn’t know how. The second problem is How to set a clock track impedance in all bord, and check it. Protel web side haven’t contain any training material about this simulation. Who know how connected a IBIS, and Spice model with Signal Integrity Module in Protel. Below I’m past Signal Integrity Report.

Designator to Component Type Specification
------------------------------------------
C Capacitor
D Diode
L Inductor
Q BJT
R Resistor
U IC
Z Connector


Power Supply Nets
-----------------
VC25 2.500 Volts
VC3 3.300 Volts
VC5 5.000 Volts

ICs with valid models
---------------------


ICs With No Valid Model
-----------------------
X1 6MHz Closest match in library will be used
U21 74HC574 Closest match in library will be used
A1 ARC-3 Closest match in library will be used
A2 ARC-3 Closest match in library will be used
B1 BUZZER Closest match in library will be used
SW1 MK Closest match in library will be used
K1A NML0505S Closest match in library will be used
X2 24.5760MHz Closest match in library will be used
U1 64F3052 Closest match in library will be used
O1 6N137 Closest match in library will be used
O2 6N137 Closest match in library will be used
O3 6N137 Closest match in library will be used
U17 74LVC4245A Closest match in library will be used
U18 74LVC4245A Closest match in library will be used
U13 93C66 Closest match in library will be used
U7 AT45DB1282 Closest match in library will be used
U7A AT45DB321C Closest match in library will be used
U14 EM4095 Closest match in library will be used
U2 FT232BM Closest match in library will be used
U8 LM335 Closest match in library will be used
U12 MAX202 Closest match in library will be used
U9 MAX485 Closest match in library will be used
U10 MAX485 Closest match in library will be used
S2 SKR2 Closest match in library will be used
U4 TC554001AFT-70L Closest match in library will be used
U5 TC554001AFT-70L Closest match in library will be used
U3 TPS3823 Closest match in library will be used
U6 TPS70158 Closest match in library will be used
U11 XC2S15-5TQ144C Closest match in library will be used

I’m be so satisfied when somebody answered me.

 

[khorshid]

protel signal integrity

Hello
I think you can find your answer in this attachmet.
Bye

 

[gdxk]

6n137 library

Hello,I want to ask How to set up 'Power Supply Nets '?
Thanks!