Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to set PAC parameters of sim up-conversion mixer IIP3

Status
Not open for further replies.
F

fenglingke

Newbie level 4
Joined
Nov 21, 2008
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,318
Re: How to set PAC parameters of sim up-conversion mixer IIP

Hello, everyone
I have design a up-conversion mixer, IF=400MHz,LO=2600MHz and RF=2200MHz. I want to use PSS+PAC to simulation mixer IIP3 follow "SpectreRF User Guide", and find a question when set PAC simulation"Array of indices"
Because I set fundamental tone of 200MHz, Lo at 2.6GHz, and two IF tones at 400MHz and 410MHz. So I need to set "sidebands". But I can't to know how to set, please help me, thank!

Added after 3 hours 31 minutes:

could someone helop me?thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top