Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to modeling a SATA cable, plz?

Status
Not open for further replies.
DZC

DZC

Full Member level 2
Joined
Sep 12, 2006
Messages
149
Helped
13
Reputation
26
Reaction score
5
Trophy points
1,298
Activity points
2,122
sata cable simulation

I have the SATA RX and TX circuitm, and now I'd like to have a far end loop back test simulation. But I have no idea how to model the channel.
Any suggestion?
 

I'd try and use the transmission line model, and introduce perturbation of attenuation, mismatch of adaption and reflection, either from real cable specs, or your estimation values.
Good luck! erikl
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top