how to interface CH7301C DVI Transmitter Device via vhdl

[mo.khairy.mo]

Hi all,
i need to write a vhdl code to generate the input interface signals for CH7301C DVI Transmitter Device how can i do this ?!


thanks in advance

 

[TrickyDicky]

With a text editor?

 

[mo.khairy.mo]

i'm using xilinx sp605 board and i ise11.4

 

[dima_sys]

Hey mo.khairy.mo !
I am using same board and i have the sane problem.
Have you did it ? Could you please provide vhdl code how to control CH7301C so it can transmit signal to monitor.

 

[farhada]

Check this out, it is in Verilog:

https://translate.google.com/transl...hs=hiw&rls=org.mozilla:en-US:official&prmd=df

You have the datasheet here:
**broken link removed**

 

[dima_sys]

google translate link in nice ))
But how he can display text data ?? there is only verilog module without top module.

And datasheet didnt helped me at all. what i need to send on data bus D(0,11)?
How to program chrontel trasmitter via I2C bus ?

 

[farhada]

HI,
Check out this App note:
**broken link removed**

You have to study the datasheet under the "register control" section will have everything you need. You must study the datasheet and find out what you want to do, if you contact the company, they may give you some sample code to set up the device for different standards.

Cheers,
/Farhad