dreamzalive
Junior Member level 1
thanks a lot for your guidance and help..
actually, i solved this problem in ie3d in which i have taken the feedline of 3mm for which the result was coming perfect that's why i was trying it on hfss with the same dimension,
and while i was using waveport the impedence was 36ohm, so i gave the lumpedport impedence of 36ohm. i did it on rt-duoroid and am getting the prfect result and simulated the same for fr4 but as you said the third notch was not appearing so i wanted to know that my design was correct or not.i also changed the dimensios a lot than i asked here.if you want to see the rt-duoroid result ican upload that here.and the file you have sent is not opening, something called line render axis error is coming and hfss11 is not able to read the i/o.
actually, i solved this problem in ie3d in which i have taken the feedline of 3mm for which the result was coming perfect that's why i was trying it on hfss with the same dimension,
and while i was using waveport the impedence was 36ohm, so i gave the lumpedport impedence of 36ohm. i did it on rt-duoroid and am getting the prfect result and simulated the same for fr4 but as you said the third notch was not appearing so i wanted to know that my design was correct or not.i also changed the dimensios a lot than i asked here.if you want to see the rt-duoroid result ican upload that here.and the file you have sent is not opening, something called line render axis error is coming and hfss11 is not able to read the i/o.
Last edited: