Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] How to get Iout/Ib in the Y-aixs in DC analysis

Status
Not open for further replies.
M

muffassir

Member level 3
Joined
Sep 15, 2011
Messages
67
Helped
10
Reputation
20
Reaction score
10
Trophy points
1,288
Location
Planet Earth
Activity points
1,802
Hi all

My output current is Iout ...and i have some fixed bias current Ib=250nA,

During DC Analysis i am varying one of the design variables so that will appear of x axis.

ON Y-Axis i want Iout/Ib i.e. the current will be normalized to -1 and 1. How to do that in CADENCE 6.1.4...here am getting only Iout on Y axis.


Any help is much appreciated.

Thanks in advance..

- - - Updated - - -

Hi all ,,

I have solved it myself!!!....

I have used the calculator to create the expression tht i wanted...i.e.Iout /Ib.. and entered it in the outpus tab...thts it...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top