vertikaltahanto
Newbie level 1
I'm a newbie using spartan 3E development board (XC3S500E-4FG320C).
I'm intending to display ADC code on LCD but it'll be like for 0000 0000 0001, display 0.00035V or -60dB.
How can I do this in VHDL? or need to use EDK/SDK?
Thanks.
Added after 2 hours 24 minutes:
actually there are about > 4000 values to dispaly. If I use a case, for X dislplay Y, it may take very long. and if I don't think that can use for loop (like--> for i =0, i<4096, i ++, then display....) as my answers in dB is not an incrementing value. basically i need to declare the LSB= XXX then 20*log (A/B).
Any suggestions?
Thanks.
I'm intending to display ADC code on LCD but it'll be like for 0000 0000 0001, display 0.00035V or -60dB.
How can I do this in VHDL? or need to use EDK/SDK?
Thanks.
Added after 2 hours 24 minutes:
actually there are about > 4000 values to dispaly. If I use a case, for X dislplay Y, it may take very long. and if I don't think that can use for loop (like--> for i =0, i<4096, i ++, then display....) as my answers in dB is not an incrementing value. basically i need to declare the LSB= XXX then 20*log (A/B).
Any suggestions?
Thanks.