Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to design an USB based XDS510

Status
Not open for further replies.
xds510 driver rar

Dear KST,

You do not need the xds510 for a tms320F2xxx DSP. I have programmed a F2811 via a simple serial cable. (2$) The method was written in another topic. The chip is in my own circuit, not in a DSK.
 

tms320-jtag circuit diagram

Dear Buenos !
Could you send me the detail of this way, mail to me: vienthong@visl.gov.vn, please ! (my internet's link is bad-Have got stupid firewall :cry: ).
thank you very much !
 

xds510 simulator

I have some confirmed prices information for XDS510s.

1. The bare board of USB2.0 based XDS510 is about 100USD
2. The full USB2.0 based XDS510 is about 121USD

Below DEV boards are not need for simulator
1. DSP+MP3 using TMS320VC5402 + C51 MCU is about 80USD
2. TMS320VC5402 download code with on-board ethernet is about 73USD

I bought the last one. It is easy by connect it to PC using network card. Also, I downloaded a parallel XDS510 package. Perhaps it is helpfull fow USB simulator.

I upload my downloaded USB20 schematic in protel 99SE and full package with GAL code and CPLD code for parallel port for reference.

daqchina@daqchina.net
 

xds510 usb jtag schematic

nice to see,but how about the code!!?
 

yu xds510-usb2.0 download

I am a freshman,have 0 points,so i can't download it .what a prety
 

xds510 isa card

Has anybody diy successed?
 

sell xds510 usb

I need "XDS510PP_CPLD.zip",but I can't download,who can help me? thanks!
email:zhanghl45@hotmail.com
 

xc9536 board diy

There's a I2C EEPROM in the schematics. How about the content ? Does it need to be pre-programmed before first use..?

thanks ...
 

xds510 site:edaboard.com

It's very slow...
 

flash programming xds510

how can i get some points?
 

xds510 cpld

I'm very interesting in diy a USB based XDS510.
 

xds510-usb2.0 f2812

why do download limited?!

Added after 3 minutes:

cheer! thank!
 

schematic tms320-jtag

hi.
I have an idea:
maybe making an ISA board with a SN74ACT8990 jtag controller and a little POD with a line driver IC, could solve the problem. on the 5402_dsk_schem.pdf there is a parallel port to ISA converter ic (PPC34C60) and a SN74ACT8990. If we make an ISA card, then only the jtag ic is necessary on the card. one problem: there should be an old PC with ISA bus.
 

build your own tms 320f2811,jtag

ding...
 

xds510 pp plus driver tms320c5x

I have XDS510 simulator with USB plug and play.
it is low cost and stable.
who need one just contact me: franson@gmail.com
 

tms320f2812 i2c schematic

HI DAQCHINA.
I can't open file USB20 simulator Schematic.
Can you send me file "USB20 simulator Schematic.dpf", because i have'nt protel. I like "XDS510" anh want to do it. Thank you.
I hope acquainted with you.
email and messenger: buihoainam_design@yahoo.com
 

xds510 usb schematic

XDS510.. made in China, it is a bad solution!
 

xds510 usb + clone

calm said:
XDS510.. made in China, it is a bad solution!
why? does anything wrong?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top